RTI Arms Mora Standard

.25 Sold out

The Mora stands out from previous models and competitors in many ways. It has been given a solid “chunky” and industrial-looking design. Ready for a lot of power. But at the same time, it has a velvety soft side.... At low pressure with pellets, it also shoots very good already. Super consistent speeds. Deviations of 1meter per second are very common. That's because you can tune it super fine.

You can fine tune the regulator from about 60 bar. Then you can fine tune the hammer spring tension and to top it off, you can adjust the dwelltime with the star knob that directly controls the valve. Then you have a huge field of possibilities. Oh yes: Important: You can also set the depth of the probe to depth. After all, the projectile should slide nicely against/in the rifling. Especially with pellets, the probe must be set a bit deeper because of the depth in the skirt. Slugs do not suffer from this, they often have a flat bottom.

The fact that they are continuing their innovative improvements is evidenced by the fact that they now have an oversized Valvestem that is very easy to change. With earlier RTI models, the entire rifle had to be taken apart. A very time-consuming job. With the Mora: Unscrew and remove the nut and change. In 5 minutes!

 Is it a rifle for everyone? Certainly not, tastes differ. Is it a precision rifle? Absolutely! For exact data, always check the site of RTI Arms Slovenia.

Oh yes: THREE year warranty!!!

https://www.rtiarms.eu/mora

We do not get the many details neatly listed. Scope, mounts and bipod not included in the price!

Mora Standard comes with 600mm/24" barrel, 700ccm carbon fiber bottle, two magazines, Hušh 50 carbon silencer, M-Lok bottle shield and heavy duty hard case.

Mora is integrally suppressed (for the markets where it is allowed) with the monocore design. Mora also comes with the additional suppressor already included, for those who want to be extra quiet.

We have designed Mora with great accuracy in mind. The barrel can either be truly free floating or it can be locked in place below the scope area.

Mora includes a smart feature where each hole corresponds to one specific oring in the rifle. If there is a leak, you can detect exactly which oring is leaking from the outside.

Valve on Mora is set in such a way, so it can easily be removed without disassembling anything else on the rifle. You can easily take out the whole valve assembly.

Inter-changeable Calibers

Calibers can be easily and quickly interchanged.

Ambidextrous Mag

Smart design of a magazine allows it to be rotated to the other side so it is lefty or righty friendly.

Suppressor ready & included

Mora is supressor ready and also comes with Hušh 50 Carbon Suppressor already included.

Adjustable Trigger

First and second stage of the trigger can be easily adjusted down to 200g.

Heavy Duty Case

Mora comes with an industry grade heavy duty transport hard case with hard foam cutout with plenty of room for accessories.

aliber
mm
4.5 5.5 6.35 7.62 9
Energy*
Joules
Standard 700ccm
60cm/24" barrel
Rifle can also be bought in 7J, 16J, 20J or 24J 37 - 70 60 - 122 80 - 175 110 - 200 /
Energy*
Joules

Rifle can also be bought in 7J, 16J, 20J or 24J / / / / 130 - 305
Regulated pressure*
Bar
PSI
100 - 200 bar
1450 - 2900 PSI
Shots per fill*
Standard 700ccm
60cm/24" barrel
/ - 60 / - 45 / - 35 / - 30 / - /
Shots per fill*

70cm/28" barrel
/ / / / / - 30
Max filling pressure 300 bar (4350 PSI)
Plenum Volume 125 ccm
Bottle Carbon fiber or Aluminium bottle
Magazine capacity 23 19 15 13 9
Max pellet length in magazine
which still fits in the magazine (all calibers) 22 mm
Max pellet length single shot
which can fit in to the barrel without the magazine (all calibers) 25 mm
Trigger 2 stage, adjustable down to 200 g
Cocking system Side lever
Grip Standard AR15 grip
Barrel
Compact (50cm/20")
LW 1:17,7", choked RPB 1:16", light choke RPB 1:20", light choke LW 1:16", choked /
Barrel
Compact (60cm/24")
LW 1:17,7", choked RPB 1:16", light choke RPB 1:20", light choke LW 1:16", choked /
Barrel
/ RPB 1:16", light choke RPB 1:20", light choke / LW 1:16", without choked
Caliber Kits Different caliber kits can be bought as an addition so you can easily change a caliber of your rifle
Safety Yes - Locks hammer in place
Optics Picatinny rail, adjustable, 20-150 MOA
Picatinny rail length 190 mm (18 slots)
Pressure gauge Two pressure gauges. First gauge shows pressure in the tank, second gauge shows plenum/regulated pressure.
Total length
Compact
Standard
Sniper
785 mm (30,9")
885 mm (34,8")
985 mm (38,8")
Height
From bottom of the grip to picatinny rail
195 mm
Width 40 mm
Bottle diameter
Standard 700ccm
60 mm (2,36")
60 mm (2,36")
83 mm (3,26")
Weight
Standard 4,4 kg
Sniper 4,6 kg

Charging type Foster coupling